Pipe Supports & Clamps

Download Product

Plain split Clamps

Specifications : Grooved construction for added strength. Used for mounting of pipes to the walls (vertical/horizontal). Hanging type is M8/M10 combi nut. M10/M12 provided as option. Lock bolts with combi cross recessed head. M6 Side Screws with PE captive disc.

View site

Rubber Lined Clamps

Specifications : Grooved construction for added strength. Used for mounting of pipes to the walls (vertical/horizontal). Hanging type is M8/M10 combi nut. M10/M12 provided as option. High Quality Rubber lining for suppression of sound & vibrations. Lock bolts with combi cross recessed head. M6 Side Screws with PE captive disc.

View site

Sprinkler Clamps

Specifications : Used for free hanging of horizontal pipe lines. Used for sprinkler system installation. Used for fire extinguishing systems. Pipe level can be adjustable vertically after Installation. Lips are dimpled at bend for added strength. One piece clip guarantees a high permissible load. Mounting without any tools.

View site

Clevis Hanger

Specifications : Designed for the fire-fighting and chilled water pipe work. Design permits vertical level adjustment of suspended pipes after installation for effective leveling of piping system. Independent suspension of large pipes. Mild steel and electro galvanized. Bottom clevis hanger facilitates installation. Engineered design aligns bolt eyes for quicker overhead installations

View site

U Strap Clamps

Specification : Mild Steel and Electrogalvanized. Designed for clamping plain or insulated pipes to standard channel supports such as trapeze hangers, floor stands and wall brackets. Slotted mounting holes for convenient installation.

View site

U Bolt

Specifications : Mild Steel and Electrgalvanized for corrosion resistance for direct fixing to pipe clamps to channel systems. With necessary precautions they can be used either as fixed or a sliding support. Supplied with two nuts and two washers

View site

Download

Riser Clamps

Specifications : Suitable for use with all types of pipes. Mild Steel and Electrogalvanized. Ideal solution for providing rigid supports or guides for all types of vertical piping due to its rugged design. Ensures stability under large lateral loads.

View site

Download

Roller Chair

Specification : Material: Roller-Cast iron, Chair-Carbon Steel, Roller Pin-Carbon Steel & MS Nut and Bolts. Standard Finish: Electro-plated Zinc. Hot dipped Galvanized parts can also be supplied upon request. Service: Designed to support pipes where axial movements are allowed, and vertical adjustments are required. This combination can also be used over the pipes to act as a guide. Mounting Nuts not included. Approvals: Complies with Manufacturers' Standardization Society MSS SP-58 and MSS SP-69 Type 41.

View site

Download

Roller Hanger

Specification : Material: Steel frame with a cast iron roller. Standard Finish: Electro-plated Zinc. Service: Designed to suspend pipes where axial movements required. Vertical adjustments are possible once the pipe is in place. The lower nut (not supplied) is used to adjust the pipeline to the required elevation. The top nut (not supplied) must securely be tightened to assure proper performance of hanger after adjustment. Approvals: Complies with Manufacturers' Standardization Society MSS SP-58 and MSS SP-69 Type 43

View site